Power Commander V Maps

[mikebl]

Just got mine dynoed yesterday, made a bit of a difference for the better, thanks to Dave for sending me the map he had but I knew it would not be quite what the bike needed, but it was an excellent start, as it was that map made the bike run a little rich, the new map is for the 2-1 V&H pro pipe with hypercharger and came out pretty good.

[davidsheek]

Originally Posted by Old BLue

Hello all, I was wondering if anybody would share there map with me? I have a 2009 voyager with vance&hines slip ons and the thunder airkit #51010. PC V 17-033 with fuel and ignition. Thanks a bunch. And is your map for power,fuel economy best of both worlds? Thanks again. mikedirtfan@yahoo.com

I sent you my map.

[cannonballs]

Originally Posted by mikebl

Just got mine dynoed yesterday, made a bit of a difference for the better, thanks to Dave for sending me the map he had but I knew it would not be quite what the bike needed, but it was an excellent start, as it was that map made the bike run a little rich, the new map is for the 2-1 V&H pro pipe with hypercharger and came out pretty good.

i also have the v/h 2into1 but had flat spot issues and noise changed to the quieter baffles and i think the bike performs much better,still loud under throttle but nice and noty at cruise
standard air intake and management system ,just gets hot when idling for awhile
question is is the pcv better than the other management system
had the pcv on my 900 and loved it

[Old BLue]

Thanks to those that sent me there map. Now if I can figure out how to open a pvm file and get some time off to play around with them. Thanks a bunch guys.

[davidsheek]

Originally Posted by Old BLue

Thanks to those that sent me there map. Now if I can figure out how to open a pvm file and get some time off to play around with them. Thanks a bunch guys.

You have to save the file to your PC then open it up with the PCV software.
If you need further help just let me know.

[Old BLue]

Originally Posted by davidsheek

You have to save the file to your PC then open it up with the PCV software.
If you need further help just let me know.

Thanks my pcv should arrive today or tomorrow. I was trying to get ahead of the game. Thanks for the information.

[davidsheek]

Originally Posted by Old BLue

Thanks my pcv should arrive today or tomorrow. I was trying to get ahead of the game. Thanks for the information.

Well if you want to get a head start to see how it all works ot just see the map, just download the latest software (1.0.6.4) from this link and check it out,
http://www.powercommander.com/powerc...x?ProdType=PCV

If you are new to the PCV, use the "Help" link at the top of the home page of that program and it will tell you everything.

[Fireboater]

Hi there David I have the Tri-Ovals on my 09 Voyager and my Thunder 91010 kit will be here Monday and then I am going to order the PCV, would you mind sending me a Good all around Map to get me started. Thank you

John Hill

[davidsheek]

Originally Posted by Fireboater

Hi there David I have the Tri-Ovals on my 09 Voyager and my Thunder 91010 kit will be here Monday and then I am going to order the PCV, would you mind sending me a Good all around Map to get me started. Thank you

John Hill

Sure John but I need your email address as this forum doesn't support that file type.

[Fireboater]

ja.hill@frontier.com,
Thank you so much.
John