Kawasaki Vulcan Forum : Vulcan Forums - View Profile: bikerbill
Go Back   Kawasaki Vulcan Forum : Vulcan Forums

bikerbill bikerbill is online now

Top Contributor

Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. freedombird777
    08-19-2013 12:40 PM
    Finally changing steering head bearings. What did you use/where did you get puller to remove steering stem bearing. I'm heading to auto zone to see if they got a loner tool to get er done
  2. bill_53
    06-15-2012 05:48 PM
    Hey Bill, nice ride I do like the dash board very clever, I believe we we have spoke on FB.
  3. bikerbill
    05-11-2012 07:23 PM

    The boots are a tight fit by design so a bit of tubbing/pulling is in order to get them to fit. Try seating a rack of four carbs onto an engine. That can get ugly if you let it.

    The boots on the airbox side are quite flexible in the horizontal direction so the in/out motion won't unseat them during normal use. Think sideways 'U'. There is a retaining ring around a flange on the airbox side so there's no chance they'll come loose from the box. The detachment was due to the carbs being forced back in a 'not straight' alignment. Don't be afraid to tug on them.

    Using grease to help the boots back on wouldn't be ill-advised. But whatever you do DON'T glue them on! (ask me how I know this ) Rubbing alcohol makes a good short-term lubricant also. Needle-noses pliers are a good friend to have too.

    Hope this helps.
  4. redfish
    05-11-2012 06:16 PM
    I read gabo234's problem with seating the carburetor boots. I had my carbs off for cleaning & adjustment and had no trouble at all getting the boots to seat. In fact, it was a tight fit to even get the carbs to slide back in. However, when the engine backfired thru the carbs the other day and blew the boots off, I had to tug & pull and wrestle the airbox side boots out enough to seat. And then just barely. Is it possible the backfire blew them back and they somehow came unattached from the airbox holes and were shifted back further away from the carbs? And could this also be gabo234's problem too?

    I don't know how they seat around the airbox holes, don't remember how they appeared before the backfire, but something isn't right and has changed.

    What do you think?
  5. bikerbill
    03-14-2011 12:02 AM

    If your wife's bike has at about 10k miles or more on it the sound is probably the exhaust pipe. The test I do is to use a padded screwdriver (or prybar) and gently pry against the exhaust pipe while it is making the noise. If the sound changes it's the pipe.

    The only place to get a replacement pipe is from Kawasaki. I use RonAyers.com as they are reasonably priced and ship fast.

    For the right side you will need one 18049-1752 pipe and two 11060-1764 crush gasket. (You'll have to remove both pipes) You can probably get by with reusing the gaskets in the mufflers and the crosspipe but if you want to replace them also use two 11060-1759 and one 11009-1865.
  6. racerX
    03-13-2011 10:05 PM
    Hello Bikerbill. How did you know when your inner exhaust pipe was broken? My wifes 500 is making a pinging noise on the right side that sounds like it could be the pipe rattle. Also where might one find a new pipe at a goo price.

About Me

  • About bikerbill
    Levelland, TX
    Safe Repair Tech
  • Signature
    'Biker' Bill
    '97 EN500LTD 'Hidalgo'
    171,000+ miles so far
    VROC #3833
    IronButt #6024
    Levelland, TX

    SlipStreamer Enterprise II, Vista Cruise,
    Fiamm air horns, Cobra Spots, Drifter solo seat,
    Pro-Tac backrest, 17/42 sprockets, Darkside rear,
    ScottOiler, F&S luggage rack ,Throttle Rocker,
    Viking bags, Victory Vegas handlebars,
    Kuryakyn grips, LED & HID lighting,
    4-gal AUX fuel tank



Total Posts
Visitor Messages
General Information
  • Last Activity: Today 08:05 PM
  • Join Date: 12-05-2009
  • Referrals: 0


Showing Friends 1 to 2 of 2

Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
Members who left positive:
Members who left negative:
Total positive feedback: 2
View Complete Feedbacks for bikerbill
6 Months
12 Months
 Positive 0 0 0
 Neutral 0 0 0
 Negative 0 0 0

All times are GMT -5. The time now is 08:08 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Forum Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Victory Charger Forum Honda Vultus Forum HD LiveWire Forum Ninja H2 Forum
Ducati Scrambler Forum Kawasaki Ninja 250SL Forum