Kit for 1700's heat issue - Kawasaki Vulcan Forum : Vulcan Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 54 (permalink) Old 12-23-2009, 12:17 PM Thread Starter
Administrator
 
MN-Rider's Avatar
 
Join Date: Apr 2008
Location: Twin Cities, MN
Posts: 6,434
Garage
Kit for 1700's heat issue

I don't have a 1700 and follow the threads all that closely so I apologize if this previously posted.

PARTS KIT TO REDUCE 2009
VULCANŽ 1700 ENGINE HEAT
AVAILABLE MID-JANUARY
In surveys conducted with owners of 2009
VulcanŽ VN1700 models, it came to our
attention that some customers may experience
uncomfortable levels of engine heat on the right
side of the motorcycle.
Well, we have great news! A parts kit will be
made available in mid-January for 2009 models
you have in your inventory (2010 models already
have the new shielding installed). Additionally,
Kawasaki will contact current owners to let them
know that they can have this kit installed by their
Kawasaki dealer.
Part kits will be supplied at no cost and
Dealers will be reimbursed for installation of
the kits at their standard labor rate.
Watch your mail for a bulletin in early January
with complete instructions for parts kit ordering
and claiming labor rate reimbursement.
KAWASAKI MOTORS CORP., U.S.A.
MN-Rider is offline  
Sponsored Links
Advertisement
 
post #2 of 54 (permalink) Old 12-23-2009, 12:24 PM
Top Contributor
 
Join Date: Dec 2009
Location: Redcliff, Alberta, Canada
Posts: 1,388
Thanks very much.....Have not seen this but is good 2 know......This has been one of my issues on purchasing....The dealer i deal with here in Canada does not seem to get this information and tells my the opposite...I find way more information here than i do from any dealers up here.....Thanks again.......Terry

4 WHEELS MOVE THE BODY.....2 WHEELS MOVE THE SOUL.....
Tazlives2ride is offline  
post #3 of 54 (permalink) Old 12-23-2009, 01:57 PM
Junior Member
 
Retired8's Avatar
 
Join Date: Sep 2009
Location: Brisbane, Australia
Posts: 12
Thanks for that, no information here in Australia as yet.
Retired8 is offline  
post #4 of 54 (permalink) Old 12-23-2009, 05:05 PM
Senior Member
 
bigmacbkr's Avatar
 
Join Date: Dec 2009
Location: Alabama
Posts: 248
Quote:
Originally Posted by ********* View Post
I don't have a 1700 and follow the threads all that closely so I apologize if this previously posted.

PARTS KIT TO REDUCE 2009
VULCANŽ 1700 ENGINE HEAT
AVAILABLE MID-JANUARY
In surveys conducted with owners of 2009
VulcanŽ VN1700 models, it came to our
attention that some customers may experience
uncomfortable levels of engine heat on the right
side of the motorcycle.
Well, we have great news! A parts kit will be
made available in mid-January for 2009 models
you have in your inventory (2010 models already
have the new shielding installed). Additionally,
Kawasaki will contact current owners to let them
know that they can have this kit installed by their
Kawasaki dealer.
Part kits will be supplied at no cost and
Dealers will be reimbursed for installation of
the kits at their standard labor rate.
Watch your mail for a bulletin in early January
with complete instructions for parts kit ordering
and claiming labor rate reimbursement.
KAWASAKI MOTORS CORP., U.S.A.
Jeff where did you get this info from? I've been all over the Kawasaki site and can't find it? I hope it's accurate because if the heat problem goes un-corrected it will be a real problem this summer. Anyway, thanks for the info!

Happy 2009 1700 Nomad owner
bigmacbkr is offline  
post #5 of 54 (permalink) Old 12-24-2009, 07:26 AM Thread Starter
Administrator
 
MN-Rider's Avatar
 
Join Date: Apr 2008
Location: Twin Cities, MN
Posts: 6,434
Garage
The info was reported on the VROC forum by a member who has an advance notice . He reported it in this way, "Got this as an advance notice for VROC 1700 owners. It's not available until after the first of the year, and if you're the owner of record you'll get an official notice"
MN-Rider is offline  
post #6 of 54 (permalink) Old 12-26-2009, 09:15 AM
Senior Member
 
sansfaute's Avatar
 
Join Date: Aug 2009
Location: North Bay Ontario Canada
Posts: 439
Garage
Send a message via Yahoo to sansfaute
Well i hope it applies up here in Canada,Kawasaki seems to keep there dealers in the dark.I had asked just last week about any recalls or fixes for the heat problem on the Voyager
sansfaute is offline  
post #7 of 54 (permalink) Old 12-27-2009, 10:41 AM
Top Contributor
 
Jace Bror's Avatar
 
Join Date: May 2009
Location: Prior Lake (MPLS area), MN
Posts: 941
Garage
I would think right now the extra heat would be welcomed.

eLi
South of the Twin Cities.
Ride the river.
'07 900 Classic "turned LT"
Cobra Fi2000
Kury HyperCharger
Hard Krome 3" Big Straights (45-8025)
Metzeler WhiteWalls
Speedo fixer in back (170)
Fuel Gauge resistor
'00 Vulcan 750 (SOLD)
'73 Honda CL350
Jace Bror is offline  
post #8 of 54 (permalink) Old 12-27-2009, 01:05 PM Thread Starter
Administrator
 
MN-Rider's Avatar
 
Join Date: Apr 2008
Location: Twin Cities, MN
Posts: 6,434
Garage
Quote:
Originally Posted by Jace Bror View Post
I would think right now the extra heat would be welcomed.
Good call!
MN-Rider is offline  
post #9 of 54 (permalink) Old 12-28-2009, 10:22 AM
Top Contributor
 
Join Date: Dec 2009
Location: Redcliff, Alberta, Canada
Posts: 1,388
Quote:
Originally Posted by sansfaute View Post
Well i hope it applies up here in Canada,Kawasaki seems to keep there dealers in the dark.I had asked just last week about any recalls or fixes for the heat problem on the Voyager
Same here.....My dealer claims they know nothing, said they talked to Kawasaki Canada and they say there is no problem and they know nothing about it.....LOL.....Is ok, we are used to being a little behind the States. ....I am going to the Calgary bike show on Jan 09......I will see what the factory reps have to say....Get to see some 2010 bikes will see if any difference.....Terry....

4 WHEELS MOVE THE BODY.....2 WHEELS MOVE THE SOUL.....
Tazlives2ride is offline  
post #10 of 54 (permalink) Old 12-28-2009, 03:04 PM
Senior Member
 
bigmacbkr's Avatar
 
Join Date: Dec 2009
Location: Alabama
Posts: 248
Quote:
Originally Posted by Tazlives2ride View Post
Same here.....My dealer claims they know nothing, said they talked to Kawasaki Canada and they say there is no problem and they know nothing about it.....LOL.....Is ok, we are used to being a little behind the States. ....I am going to the Calgary bike show on Jan 09......I will see what the factory reps have to say....Get to see some 2010 bikes will see if any difference.....Terry....
It seems as though the dealers are always the last to know about any changes to the line and it's the same here in the states. I remember last year when I questioned my local dealer about the changes to the '09's he said there were no changes from the '08 models! I hope Kawi at least makes the "kit" available to we '09 Vulcan owners even if they don't opp to fix it for free.

Happy 2009 1700 Nomad owner
bigmacbkr is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan Forum : Vulcan Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome