New rider - how to lock front wheel? - Kawasaki Vulcan Forum : Vulcan Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 07-04-2010, 02:03 PM Thread Starter
Junior Member
 
Island Rider's Avatar
 
Join Date: Jul 2010
Location: BC, Canada
Posts: 6
New rider - how to lock front wheel?

Hello - What an excellent forum! I'm a new female rider and have just picked up a 2005 Vulcan 500 without an owners manual. For the life of me, I can't figure out how to lock the front wheel. If I push in the key and move it to the right (P), the rear brake light goes on, but the wheel doesn't lock in place. Am I doing something wrong?

I really like this bike and having taken the M/C Safety Council Course, feel pretty good riding, just need a bit more practice. Now if the weather would just behave.....

Any tips are appreciated. Thanks!
Attached Thumbnails
Click image for larger version

Name:	IMG_2561.jpg
Views:	149
Size:	87.8 KB
ID:	2244  
Island Rider is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 07-04-2010, 02:17 PM
Senior Member
 
peruano's Avatar
 
Join Date: Jun 2009
Location: New Mexico
Posts: 238
front wheel lock

Don't feel bad. The fork lock on the VN 500 works differently than any other cycle I've used. You must push in on the key as you are turning it to the right. The whole cylinder pushes in about a quarter of an inch and locks in the inner position (which locks the steering column). When you unlock it, you may have to take a bit of pressure off of the lock by just barely moving the bars while you are turning the key. Good luck, be patient, and by all means don't twist off that key. I've heard lots of people complain about this lock but I suspect some of them were not patient enough to determine how it worked and how best to make it turn easier. Good luck and enjoy the bike. Tom

Tom, New Mexico. Just trying to have me some fun.
2006 Kawasaki VN500
2002 Yamaha TW200
peruano is offline  
post #3 of 15 (permalink) Old 07-04-2010, 02:41 PM
Senior Member
 
jerryneyk's Avatar
 
Join Date: Jun 2009
Location: Prague, Czech Republic
Posts: 150
I've never gotten it to work on mine and just gave up. Others have similar experiences so if you don't get it you're in good company. Enjoy it, it is a wonderful fun bike to ride, and from a stop no one will beat you
jerryneyk is offline  
post #4 of 15 (permalink) Old 07-04-2010, 03:33 PM
Senior Member
 
KG6NLC's Avatar
 
Join Date: Sep 2008
Posts: 153
Quote:
Originally Posted by Island Rider View Post
Hello - What an excellent forum! I'm a new female rider and have just picked up a 2005 Vulcan 500 without an owners manual. For the life of me, I can't figure out how to lock the front wheel. If I push in the key and move it to the right (P), the rear brake light goes on, but the wheel doesn't lock in place. Am I doing something wrong?

Any tips are appreciated. Thanks!
If I'm reading this right, you trying to use the ignition switch to lock your forks, which won't work. The fork lock (wheel lock) is up by the handlebars under a metal slide cover. When you insert the key, push it in, cylinder and all with the wheel turned to the right. You may have to "jiggle" the handlebars a little to line things up, then turn the key to the front to lock it. I gotta mess with mine quite a bit to get just right. The "P" on the ignition switch is a parking light. If your parked on the side of a dark road and want to be seen without having the bike running or something like that.

Like your blue bike!

Last edited by KG6NLC; 07-04-2010 at 03:35 PM. Reason: add info..
KG6NLC is offline  
post #5 of 15 (permalink) Old 07-04-2010, 04:20 PM
Senior Member
 
Join Date: Feb 2010
Location: Port Isabel, TX
Posts: 146
front wheel lock

When I bought my 2000 500 the previous owner said that the wheel lock didn't work and he couldn't figure out why. After spraying the lock mechanism with some penetrating spray lube and fiddling with it, I finally got it to work. The breakthrough came when I found out that the key only works IN ONE DIRECTION.

Insert the key into the lock cylinder and while turning it counter-clockwise, push in. If the cylinder doesn't turn and push in, rotate the key 180 degrees/half-a-turn and try again. The cylinder should turn about a quarter turn or less and go in about a 1/4 to 1/2 inch. When the cylinder bottoms out, while holding it pushed in, turn the key back clockwise. It should click into the locked position and the cylinder should remain pushed in.

To unlock, insert the key and while moving the handle bars back and forth gently to relieve pressure on the locking pin, push in on the cylinder and turn counter-clockwise and the locking pin should release and the cylinder should pop back out to the original unlocked position. Turn the key back clockwise and remove.

On my bike the key also only works in one direction on the ignition switch.

Hope this helps.
PI Robert is online now  
post #6 of 15 (permalink) Old 07-04-2010, 05:46 PM
Top Contributor
 
GeorgiaRider's Avatar
 
Join Date: Oct 2008
Location: NW Georgia
Posts: 624
I haven't used mine yet. Scared I'll drive off and forget to unlock it...

GeorgiaRider
2006 Vulcan 500

Saddlemen Cruis'n Large Slant Saddlebags
Kuryakyan Foot Peg Extenders and Pegs
Kuryakyan Iso-Grips and Throttle Boss
Memphis Shades Alley Cat Windshield
Powersports Mini-Tachometer
Kawasaki Luggage Rack
Airhawk cushion
Marlin's Clock
GeorgiaRider is offline  
post #7 of 15 (permalink) Old 07-04-2010, 05:48 PM Thread Starter
Junior Member
 
Island Rider's Avatar
 
Join Date: Jul 2010
Location: BC, Canada
Posts: 6
Would help if I used the right lock

Quote:
Originally Posted by KG6NLC View Post
If I'm reading this right, you trying to use the ignition switch to lock your forks, which won't work. The fork lock (wheel lock) is up by the handlebars under a metal slide cover. When you insert the key, push it in, cylinder and all with the wheel turned to the right. You may have to "jiggle" the handlebars a little to line things up, then turn the key to the front to lock it. I gotta mess with mine quite a bit to get just right. The "P" on the ignition switch is a parking light. If your parked on the side of a dark road and want to be seen without having the bike running or something like that.

Like your blue bike!

Oh wow - I was trying to use the ignition switch (oops) and have now found the slide cover - thank you! Now that I am using the right lock, I'll try and fiddle with it to make it work.

Thanks everyone for all your help.
Island Rider is offline  
post #8 of 15 (permalink) Old 07-04-2010, 08:46 PM
Top Contributor
 
racerX's Avatar
 
Join Date: Apr 2009
Location: Florida
Posts: 926
When we got my wifes 2005/500, I had to lubricate the cylinder before it would move in, once you do it a few times it is easy. Her's is the same nice blue color.

2007 EN500-17K miles
USN Retired
Donít let society influence you.. You should be the influence for society.
To The World You Might Be One Person;
But To One Person You Might Be the World.
racerX is offline  
post #9 of 15 (permalink) Old 07-04-2010, 09:24 PM
Senior Member
 
peruano's Avatar
 
Join Date: Jun 2009
Location: New Mexico
Posts: 238
parking lights

Hey I learned something. I never realized that the ignition had anything beside on and off. I'm going to look for the P option. Tom

Tom, New Mexico. Just trying to have me some fun.
2006 Kawasaki VN500
2002 Yamaha TW200
peruano is offline  
post #10 of 15 (permalink) Old 07-05-2010, 01:01 AM
Junior Member
 
Join Date: May 2010
Location: Brooklyn, NYC
Posts: 17
I did the same.. Sprayed a decent amount of DW40 in the wheel lock cylinder and it works perfectly. It just take a little getting used to. Twist the key and push down, and when it stays *down*, it's locked. Sometimes wiggling the handlebars is necessary.

2007 Vulcan 500
breaker1nine is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan Forum : Vulcan Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome