what weight oil for 2009 vulcan 900 - Kawasaki Vulcan Forum : Vulcan Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 06-17-2010, 04:56 PM Thread Starter
Junior Member
 
Join Date: Jun 2010
Posts: 1
what weight oil for 2009 vulcan 900

whats the best weight oil 10w40 or 10w50 , full syn? what brand ?
vulkurt is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 06-17-2010, 05:01 PM
Top Contributor
 
V Twin's Avatar
 
Join Date: Jan 2010
Location: Dallas, TX
Posts: 711
10-40 is the recommended in the manual. I once used a 20-50 and the bike became to noisy so went back after 1000 miles. I now run 15-40 and I wouldn't recommend anything thicker than that on a water cooled engine.


Gitty Up & Go!

2007 VN 900 Custom modifications:
Corbin Young Guns Saddle*OEM Classic Gel Flame Saddle (when 2up)*OEM Light Bar*National Cycles Shield*OEM Ribbed Handlebar Grips*OEM Classic Rear Fender*PC III*V&H SCS Pipes (Modified)*Comet Milled BAK*Engine Guard*Genmar Risers*Clear Alternatives Integrated Tail Light*Kury Magnum Plus Mirrors*Kury Cruise Control*Upgraded Horn*Metzler 90/90/21*Avon Venom 200/70/15*Both SW Pulleys.

Last edited by V Twin; 06-17-2010 at 05:05 PM.
V Twin is offline  
post #3 of 14 (permalink) Old 06-17-2010, 08:16 PM
Senior Member
 
Join Date: Sep 2009
Location: SW MO
Posts: 167
15w40 amsoil baby

2008 Candy Lime Green VN900C

Cut/DeBaffled OEM Pipes
Ram Air Mod
Lowered 2"
Saddlemen Seat
9" Apes
thehun is offline  
post #4 of 14 (permalink) Old 06-17-2010, 08:33 PM
Top Contributor
 
Pretzel's Avatar
 
Join Date: Apr 2009
Location: Oklahoma
Posts: 1,554
I run 15w40 dino oil, as far as what brand... well, plenty of opinions/arguments/discussions out there, just watch out as some people get VERY angry.

BACA Pretzel - Flyin' the highways in OK!
'08 Vulcan 1600 Nomad - "Grace"
Metallic Diablo Black/Candy Fire Red
LED Run/Turn/Brake
Vance and Hines Duals
Dobeck TFI
Kuryakyn Flame grips with Throttle Boss and Stiletto endcaps
Kuryakyn Longhorn offset highway pegs
Vista throttle lock
OEM light bar and luggage rack

B.A.C.A. Member, Oklahoma Chapter

Out to pasture - 2008 Vulcan 900 Custom: Redemption
Pretzel is offline  
post #5 of 14 (permalink) Old 06-17-2010, 10:50 PM
Top Contributor
 
V Twin's Avatar
 
Join Date: Jan 2010
Location: Dallas, TX
Posts: 711
Yup, there is two coments that will get some bikers really upset.
Oil & car tires on a bike.


Gitty Up & Go!

2007 VN 900 Custom modifications:
Corbin Young Guns Saddle*OEM Classic Gel Flame Saddle (when 2up)*OEM Light Bar*National Cycles Shield*OEM Ribbed Handlebar Grips*OEM Classic Rear Fender*PC III*V&H SCS Pipes (Modified)*Comet Milled BAK*Engine Guard*Genmar Risers*Clear Alternatives Integrated Tail Light*Kury Magnum Plus Mirrors*Kury Cruise Control*Upgraded Horn*Metzler 90/90/21*Avon Venom 200/70/15*Both SW Pulleys.
V Twin is offline  
post #6 of 14 (permalink) Old 06-18-2010, 03:22 PM
Member
 
bob900's Avatar
 
Join Date: Aug 2008
Posts: 67
I agree dont run 20 50 as for i was also noticing the louder trans noise so back to a quiet running 10 40. Well not to quiet these bikes are just a little bit noisy with valves ticking away like crazy. But all good as this is what this engine sounds likel.
bob900 is offline  
post #7 of 14 (permalink) Old 06-18-2010, 03:53 PM
Senior Member
 
Join Date: Apr 2010
Location: Bad Axe, Michigan
Posts: 224
oil

This subject came up on here a while back and there were some tense moments! LOL. I just did my first change myself after the 600 mile suggestion in the manual. What I took from the majority of the entries is that you shouldn't use synthetic for the first couple changes since it sticks more and won't drain out the metal shavings as much? So...I went with Valvoline 10-W-40 as in the manual and used the 2002 Infinity Filter for $6.00 from Napa as reccomended on here. Fit well, tons cheaper than the OEM and others. My dealer said I have to come in as he has the tool you need to get old filter off. I bought one at Napa for $5.00. Have to make sure the oil is CA listed on the bottle for the wet clutch. Not all car oils have that, the Valvoline I used said ATV on the label and was $5.00 per quart.

2009 Black Classic

Mustang Seat w/Backrest
Cobra Standard Backrest with Luggage Rack
Smoke Slipstreamer Windshield
Lindby Multibar Engine Guards
Homemade Lowers
Wally World Running Lights
Stebel Air Horn
Vista Cruise Control
Scootworks Front OD Pulley
Stage 2 Debaffle Stock Pipes
170/80/15 Pirelli Rear Tire
Kury Run/Turn/Brake module
gmer140 is offline  
post #8 of 14 (permalink) Old 06-18-2010, 07:27 PM
Top Contributor
 
Join Date: Apr 2010
Location: Somewhere near Parkville, MO
Posts: 976
The upper range in the engine spec book for 10W-40 is 104 F (40 C). There are times here in KC where that is exceeded. Not often but it happens. So I run 20W-50 Mobil 1 V-twin oil during the summer months and 10w-40 Mobil V-twin during the rest of the year. That's a quandry because there are times in winter where the bottom of 10w-40 isn't low enough. My bike is inside at nights but sits outside all day. Usually the temperatures raise above the lower limit before I leave work.

I haven't noticed any loud noises with the 20 w, in fact it's usually quiter. but it's extreme cases where the 10-40 is exceeded and the vast majority of bikers aren't going to be out riding in that junk where some of us just have the commute home.

This is just what I do. Nobody else has to do it, just because it's in the manual doesn't mean you need to do it. Heck, half the people have problem reading that thing for Octane ratings let alone a temp chart for oil.

Last edited by MrClean; 06-18-2010 at 07:34 PM.
MrClean is offline  
post #9 of 14 (permalink) Old 06-18-2010, 07:38 PM
Senior Member
 
Shiloh's Avatar
 
Join Date: May 2009
Location: Katy Texas
Posts: 209
Quote:
Originally Posted by MrClean View Post
......
Heck, half the people have problem reading that thing for Octane ratings let alone a temp chart for oil.
The number of octane questions is impressive.

09 Vulcan 900 Custom - Traveller
09 FZ 6 - Lakota
Shiloh is offline  
post #10 of 14 (permalink) Old 06-20-2010, 03:46 AM
Member
 
azpostal's Avatar
 
Join Date: Feb 2010
Location: Arizona
Posts: 52
I too am ready to attempt my first oil change. I just don't know about using 10w40. It was 105 here today!
azpostal is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan Forum : Vulcan Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome