o2 sensors and fuel processors which one - Kawasaki Vulcan Forum : Vulcan Forums
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 01-03-2013, 04:42 PM Thread Starter
cobra 1's Avatar
Join Date: Jan 2013
Location: canvey island uk
Posts: 39
o2 sensors and fuel processors which one

i am a new member and have just bought my first bike a 2009 vn 900 custom se European version i have owned it about three months now and have just started adding a few toys and changes to it. i like the whole blacked out look on it so have added a black sissy bar and crash bar and black kuryakyn iso grips i have also replaced all the indicator lenses to clear and the tail light lens to clear as well my latest mod was to order a la choppers big air kit and i have also ordered a cobra fi2000r fuel processor as i am planning to replace the stock pipes with some vance and hines slash cuts in black also which i am yet to order i am a bit confused though because although my stock pies have the co2 censors in them and the slash cuts have ports in them to replace the co2 censors i am unsure as to which cobra fi2000r model i would need to use with the co2 sensors i have found out that the power pro version would not work and i have already ordered and paid for the standard one but after some research think i might need the arb California version i have also looked at another thread for bypassing the o2 censors with some resistors or o2 sensor plugs but would rather not do that if their is a right product for me to use with the sensors any information would be appreciated for a complete newbe to all this i have the order on hold so i can still change it thanks guys
cobra 1 is online now Report Post Edit/Delete Message
cobra 1 is offline  
Sponsored Links
post #2 of 6 (permalink) Old 01-03-2013, 05:35 PM
Junior Member
RugerMan's Avatar
Join Date: Jan 2011
Location: Chambersburg
Posts: 22
Vulcan Map pc v

here's a fuel map for a vulcan 900 with Barons BAK,cobra longs. This is a PC V file
Attached Files
File Type: zip dean horst map.zip (998 Bytes, 54 views)
RugerMan is offline  
post #3 of 6 (permalink) Old 01-03-2013, 10:33 PM
Top Contributor
Join Date: Apr 2009
Posts: 10,620
If you can use a system that uses/retains the O2 sensors, that is the route to take.

If you can get Sojourners attention, I think he has had some experience with this.
sfair is offline  
post #4 of 6 (permalink) Old 01-04-2013, 04:46 AM Thread Starter
cobra 1's Avatar
Join Date: Jan 2013
Location: canvey island uk
Posts: 39

thanks for the reply i would like to retain the co2 sensors in the pipes and am still none the wiser to what fuel management system would work although i think i might need one that works with a closed loop or overrides a closed loop does anyone know if the fi2000r does this or if their is another option or product
thanks guys for all your help
cobra 1 is offline  
post #5 of 6 (permalink) Old 01-04-2013, 08:44 AM
Join Date: Jun 2011
Gender: Male
Posts: 55
I have the TFI from techlusion (the one with potmeter fore screwdriver) and it was ok. Then i got o2 sensor bypass and now the box is great.
I got the sensors from nederland. They are hard to find for the VN900.michael
pumper is offline  
post #6 of 6 (permalink) Old 01-06-2013, 09:44 AM Thread Starter
cobra 1's Avatar
Join Date: Jan 2013
Location: canvey island uk
Posts: 39
it looks like i am not going to be able to keep the sensors in so i am going to go the sensor eliminator route i don't want to just put a couple of resistors in and cobra only make eliminators for the 2000 which apparently don't fit the 900 so i found this alternative. their is a guy on eBay (bk racing parts) he sells a specific lambada (o2) sensor eliminators he didn't have them advertised for the 900 but i emailed him and he does sell them and does post world wide here is a link if any body is interested
and this is the fitting guide it looks pretty straight forward
once they have arrived and i have installed them i will update and let you know how easy the install is and if they work
cobra 1 is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Kawasaki Vulcan Forum : Vulcan Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome