Maybe beating a dead horse here but here goes anyway. Particulars are '07 VN2K LT, current mods are ais deleted, double darkside, force winder like intake. Have added a tail box, corbin 2 up seat, and led passing lights. P.O. had removed baffle screens and drilled 8 holes in each baffle plate. I've searched extensively and have found a sack full of info on the 900 but very little specific to the v2k. Has anyone had any experience? Did you have to add a fuel processor, that kind of thing. Second, I was wiring up 4 ways last night, wanted the switch on the left handlebar so pulled a trigger wire to my Switch location through the existing loom. I didn't think I could get 2 more wires through so I pulled the handlebars Switch apart and made my connections to the turn wires there. Put it all back together and put power to things to be sure I hadn't messed something up. The connection hadn't been made to the trigger wire yet. Tried my turns, all worked fine, flipped the little switch I had installed and 4 ways started flashing. WTH?! Anyway, they work without external power if you flip the switch and a turn, regardless of direction. Will this hurt the factory flasher? Thanks.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk