Kawasaki Vulcan Forum banner

Headlight swap

20K views 16 replies 13 participants last post by  Niklas_sweden 
#1 ·
So I feel like I've seen at least one S on here that someone swapped the oem headlight out for a standard/round/Harley-ish headlight but for the life of me I can't find that image much less who it was.

I was looking at doing this myself with a 7" halo hi/low led and was curious what parts were used. In particularly the mounting bracket.

Anyone have any suggestions or experience.

If not I suppose I'll just pull the oem headlight and see what I might need.

-Alloy
 
#2 ·
I've got fork mount clamps ready for when I do mine. The easiest way is to buy these and a light with side mount screws.

As far as electrics look for a H4 globe light so you can plug straight in without adaptors or cutting.
You will also benefit by getting a light with a wedge globe "city light" fitting.
 
#12 · (Edited)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top